DRAKOS Fire Pump (UL, SETSCO listed)
Fact sheet download >>>>>>>>>>>>>>>
Product image

This pump is a horizontal and split type, with both pump casing and cover split at the central line of the shaft, both water inlet and outlet and the pump casing cast integrally. A wearable ring set in between the impeller and the pump casing, the impeller axially fixed upon an elastic baffle ring and the mechanical seal directly mounted on the shaft and without a muff. These will greatly reduce the works of repair for the pump user. The shaft is made of stainless steel the packing seal structure is set with a muff to prevent the shaft from worn out. The bearings are open ball bearing type and a round post roller bearing and axially fixed upon a baffle ring. There is no thread and nut on the shaft so the moving direction of the pump can be changed any time without the need to replace the shaft. The impeller is made of Bronze material.

Operating Data

Pump Size DN : 80 ~ 250 mm
Capacity Q : ≤ 345 L/sec
Pressure P : ≤ 3 Mpa
Working Temperature T : up to 80º C
Medium : Pure water and similar to that of pure water